Regulation and control

Regulation and control of clean rooms and classified spaces

04_03_Regulación_control

We program and install the architecture for the Regulation and Control of Classified Zones in accordance with the GMP and FDA CFR21 part 11 regulations, applying the parameters established to ensure compliance with UNE-EN ISO 14644 for the control of the critical parameters of the installation.

To carry out an exhaustive control, we centralize and program all the information in the room by means of a PLC, which will be directly connected to the instruments to be monitored.

In the installation, we adapt to the client’s needs, therefore, we offer the possibility of adding any analog or digital element of the room to the control system. In turn, if remote data control and supervision is required, we will connect the PLC (Program Logic Controllator) to a SCADA system (Supervisory Control And Data Acquisition).

Iguña has the latest technology on the market. This will allow us to carry out automatic controls of the room data in real time, allowing us to prevent and act to guarantee the optimal conditions in the area at all times.

Ask for information

Why Iguña

More than 30 years of experience in clean rooms and classified spaces

GMP compliance

Knowledge of and strict compliance with the GMP's guidelines.

BIM

Engineering development using 3D BIM Software (Builiding Information Modeling).

Integral service

Project execution, commissioning and after-sales services.

Keys on hand

Design, engineering, execution, commissioning, validation and maintenance.